|
|
 | DURAGADGET USB Data sync / synchronisation cable for HTC Hero
Brand: DURAGADGET Part Number: 133cc-zDT
USB Data Sync Cable for GPS SAT NAV including Garmin, Mio, Navman & TomTom This USB sync cable offered will support the connection of any satellite navigation system (GPS) featuring a 5 pin mini B USB port and connects your GPS directly to the computer for updates, maps and downloads. Would you like to install - Extra maps?Extra points of interest such as speed cameras?,New funny voices ? The latest software updates or firmware updates? Compatible satnav units GARMIN Garmin Nuvi: 200, 200W 205 205w 215 215t , 250 255 255w, 250W, 260 265 265t 265w 265wt, 260W, 270 275 275w 275t, 300, 310, 350, 360, 370, 600, 610, 650, 660 665 , 670, 680, 710, 750, 760, 770 775, 780 & 5000 Garmin StreetPilot: 450, 500, 550, 2600, 2610, 2620, 2700, 2820, C310, C320, C330, C340, C510, C550, C580, i2, i3 & i5 Garmin Quest eTrek: Legend C CX & Vista C CXGarmin Rino: 500, 510, 520 & 530Garmin GPSMAP: 60 Series & 76 SeriesGarmin Forerunner: 205, 301, 305,Garmin Edge: 205 MITACMitac: Mio, 168, 169, 268, 269, C220, C230, C310x, C720T & P550m NAVMANNavman: ICN, 320, 330, 510, 520, 530, 550, 610, 720, 750, F20, F30, F40, F50, N20, N40i, N60i, S30, s35 , S50, S70 & S90i s100 s150 s200 ROAD ANGELRoad Angel Navigator: 6000 & 7000 TOMTOMTomTom GO Classic: 300, 500, 510, 520, 700, 710, 720, 910, ONE, ONE v2 V3, ONE XL & Rider Specification re may be necessary for the transfer of data to and from your computer system. Such software is usually available to download from a variety of websites though I am unable to personally supply such software or guarantee its availability.Specification of Device/CableCable type: USB 2.0 (compatible with USB 1.0 / 1.1) Cable length: 1m approx Connector 1: USB Type A Connector 2: USB Mini B (5 pin) | *$0.01 |
| DURAGADGET USB Data sync / synchronisation cable for Mio Moov c520 C520t
Brand: DURAGADGET Part Number: 133cc-zDE
USB Data Sync Cable for GPS SAT NAV including Garmin, Mio, Navman & TomTom This USB sync cable offered will support the connection of any satellite navigation system (GPS) featuring a 5 pin mini B USB port and connects your GPS directly to the computer for updates, maps and downloads. Would you like to install - Extra maps?Extra points of interest such as speed cameras?,New funny voices ? The latest software updates or firmware updates? Compatible satnav units GARMIN Garmin Nuvi: 200, 200W 205 205w 215 215t , 250 255 255w, 250W, 260 265 265t 265w 265wt, 260W, 270 275 275w 275t, 300, 310, 350, 360, 370, 600, 610, 650, 660 665 , 670, 680, 710, 750, 760, 770 775, 780 & 5000 Garmin StreetPilot: 450, 500, 550, 2600, 2610, 2620, 2700, 2820, C310, C320, C330, C340, C510, C550, C580, i2, i3 & i5 Garmin Quest eTrek: Legend C CX & Vista C CXGarmin Rino: 500, 510, 520 & 530Garmin GPSMAP: 60 Series & 76 SeriesGarmin Forerunner: 205, 301, 305,Garmin Edge: 205 MITACMitac: Mio, 168, 169, 268, 269, C220, C230, C310x, C720T & P550m NAVMANNavman: ICN, 320, 330, 510, 520, 530, 550, 610, 720, 750, F20, F30, F40, F50, N20, N40i, N60i, S30, s35 , S50, S70 & S90i s100 s150 s200 ROAD ANGELRoad Angel Navigator: 6000 & 7000 TOMTOMTomTom GO Classic: 300, 500, 510, 520, 700, 710, 720, 910, ONE, ONE v2 V3, ONE XL & Rider Specification re may be necessary for the transfer of data to and from your computer system. Such software is usually available to download from a variety of websites though I am unable to personally supply such software or guarantee its availability.Specification of Device/CableCable type: USB 2.0 (compatible with USB 1.0 / 1.1) Cable length: 1m approx Connector 1: USB Type A Connector 2: USB Mini B (5 pin) | *$5.08 |
| DURAGADGET USB Data sync / synchronisation cable for tomtom Go 550 Live
Brand: DURAGADGET Part Number: 133cc-zBW
USB Data Sync Cable for GPS SAT NAV including Garmin, Mio, Navman & TomTom This USB sync cable offered will support the connection of any satellite navigation system (GPS) featuring a 5 pin mini B USB port and connects your GPS directly to the computer for updates, maps and downloads. Would you like to install - Extra maps?Extra points of interest such as speed cameras?,New funny voices ? The latest software updates or firmware updates? Compatible satnav units GARMIN Garmin Nuvi: 200, 200W 205 205w 215 215t , 250 255 255w, 250W, 260 265 265t 265w 265wt, 260W, 270 275 275w 275t, 300, 310, 350, 360, 370, 600, 610, 650, 660 665 , 670, 680, 710, 750, 760, 770 775, 780 & 5000 Garmin StreetPilot: 450, 500, 550, 2600, 2610, 2620, 2700, 2820, C310, C320, C330, C340, C510, C550, C580, i2, i3 & i5 Garmin Quest eTrek: Legend C CX & Vista C CXGarmin Rino: 500, 510, 520 & 530Garmin GPSMAP: 60 Series & 76 SeriesGarmin Forerunner: 205, 301, 305,Garmin Edge: 205 MITACMitac: Mio, 168, 169, 268, 269, C220, C230, C310x, C720T & P550m NAVMANNavman: ICN, 320, 330, 510, 520, 530, 550, 610, 720, 750, F20, F30, F40, F50, N20, N40i, N60i, S30, s35 , S50, S70 & S90i s100 s150 s200 ROAD ANGELRoad Angel Navigator: 6000 & 7000 TOMTOMTomTom GO Classic: 300, 500, 510, 520, 700, 710, 720, 910, ONE, ONE v2 V3, ONE XL & Rider Specification re may be necessary for the transfer of data to and from your computer system. Such software is usually available to download from a variety of websites though I am unable to personally supply such software or guarantee its availability.Specification of Device/CableCable type: USB 2.0 (compatible with USB 1.0 / 1.1) Cable length: 1m approx Connector 1: USB Type A Connector 2: USB Mini B (5 pin) | *$5.08 |
 | Duragadget® 5m High Gain External GPS antenna / aerial for Other GPS Belkin BT GPS, Pretec Bluetooth GPS, PrymeNav, Route 66 Mobile Britain 2005, Route 66 Navigate Britain, RoyalTek BlueGPS (RBT-3000
Brand: DURAGADGET Part Number: 2_NNNN
Active amplifier GPS Antenna. High Gain MCX Connector GPS Antenna. WHY DO YOU NEED THIS ?If you have: (1) Poor reception (2) Loose reception frequently (3) Have a heat reflective windscreen (4) You want to speed up the start up time of your GPS when first locking on to satellites. Then this is the perfect product for you, this will increase the reception significantly removing any problems you may currently have with GPS reception .Ensures optimal GPS reception for your TomTom . Some specialised windscreens can block GPS signal reception inside the car. This magnetic, waterproof GPS External Antenna will overcome this limitation and ensure an optimal GPS reception. The waterproof antenna can be placed inside your car, next to your windscreen or at the back of your car. It also attaches magnetically to the outside of the car. Connect your GPS to the External Antenna and you're ready! 5 meter cable. Can boost signal by up to 400% | *$16.99 |
 | Duragadget® advanced universal Duragadget® Cup holder mount for tomtom GPS/ Sat nav including one V1 V2 V3 V4 22 30 XL GO 510 520 530 540 710 720 730 740 910 920 930 940
Brand: DURAGADGET Part Number: 206
Duragadget advanced universal Duragadget® Cup holder mount suiteable for use with tomtom GPS/ Sat nav including one V1 V2 V3 V4 22 30 XL GO 510 520 530 540 710 720 730 740 910 920 930 940 | *$24.99 |
 | Duragadget® Car cradle windshield mount holder sutiable for TOM TOM ONE XL CLASSIC
Brand: DURAGADGET Part Number: 54ap | *$14.99 |
 | Duragadget® Car drinks cup holder mount for Magellan Maestro gps satnav 3100 3210 3210 3220 3250 3225 3220 4010 4215 4050 4245 4200 4040 Maestro 4370 4350 5310 4250 4220 4210 4200 3250 3225 3220 3210
Brand: DURAGADGET Part Number: 61_FFFF
Cup holder mount platform for secure holding of your satnav, safer driving due to a clear windscreen | *$24.85 |
 | Duragadget® Car window suction mount for tomtom go 300 500 700 and classic arm only
Brand: DURAGADGET Part Number: 161kp
This item does not include the dock, this is only the windcreen mount | *$16.99 |
 | Duragadget® Deluxe EVA hard protective carry case for tomtom one xl with free screen protector
Brand: DURAGADGET Part Number: 13xl
Eva Hard protective case with built in storage pockets This case will hold your GPS, mains charger, car charger, and windscreen holder Specifically designed for your TomTom and the extras like car chargers, mounts etcSmart professional Design Hardwearing EVA Nylon Construction secure Zip closure Carry and store your TomTom and its accessories in this great EVA protective carry case. Extra compartments for storing your accessories safe and secure Hard Nylon and EVA outer shell for maximum protection | *$12.99 |
 | Duragadget® Deluxe Garmin leather carry case for new 200w 205w 205wt 215w 255w 255wt 265w 265wt 760 760t 765 765t 775 775t models. Duragadget® exclusive to Discount Satellite Navigation Ltd
Brand: DURAGADGET Part Number: 11ab
Garmin Nuvi Widescreen Leather Carry Case. This soft leather case for the Garmin Nuvi Widescreen. The leather case for the has a magnetic closer. This tough, high quality, custom-designed, Garmin Nuvi Widescreen case allows you to look after your Garmin while you re traveling between cars or carrying it around in a bag or your pocket. Specifically suited to hold Garmin Nuvi Widescreen satnav models Shock resistant protects against 'Impact'. Durable premium leather Hand stitched made to last Magnetic Closure Compatible with 200w 205w 215w 215wt 250w 255w 255wt 265w 265wt 275w 275wt 600 610 660 665t 670 760 760t 770 775 775t 850 860 870 880 and all other garmin widescreeen models | *$16.99 |
 | Duragadget® Garmin Nuvi Car Holder Mount for 200, 205, 215, 250, 255, 265, 270, 275, 205t, 205t, 215t, 255t, 265t, 275t and 300, 300t, 310, 310t, 350, 360, 370, 200w, 205w, 215w, 215wt, 250w, 255w, 2
Brand: DURAGADGET Part Number: 142a | *$10.99 |
| Duragadget® hard eva case for TomTom go 530, 540, 730 740, 730 940 live
Brand: DURAGADGET Part Number: 13mon
Eva Hard protective case with built in storage pockets This case will hold your GPS, mains charger, car charger, and windscreen holder Specifically designed for your TomTom and the extras like car chargers, mounts etcSmart professional Design Hardwearing EVA Nylon Construction secure Zip closure Carry and store your TomTom and its accessories in this great EVA protective carry case. Extra compartments for storing your accessories safe and secure Hard Nylon and EVA outer shell for maximum protection | *$12.99 |
 | Duragadget® Hi sensitivity GPS antenna HP rx5900 5910 5915 5935
Brand: DURAGADGET Part Number: 201w
GPS Active External Antenna Booster GPS Active Antenna - Original and Brand New with Magnetic Mount enhance signal strength and reception for your GPS receiver, Waterproof : works as usual in rainy weather, Frequency : 1575MHz ± 5 MHz length 5 meters, Connector: MS147 A full no quibble returns policy and a full 12 month warranty Will increase your reception by up to 12 times as much Can be mount internally and externally. Compatibility; O2 XDA Orbit II HTC P3300 HTC Dopod P100 P800 / w D810 838pro HTC Galaxy CHT9000 O2 Xda Orbit Trion NOVA T-Mobile MDA Compact III Orange SPV M650 M700 Vodafone 1605 HTC Trinity Artemis P3300/ P3600 HTC TyTN/ TyTN II Hermes Touch Cruise P3650 X7500 X7501 iMate PDA-N Qtek G100, G200 HP rx5900, 5910, 5915, 5935, 5935, 5965, 5730, 5765, 5770, 5775 Qtek G100 G200 | *$16.99 |
 | Duragadget® In car charger 12v power cable for Garmin Nuvi, StreetPilot, Zumo GPS receivers. Garmin Nuvi 680,670,660,650,610,600, StreetPilot c580,c550,c530 c510 Zumo 550,500,450,400
Brand: DURAGADGET Part Number: 232
Fits the following models streetpilot c580,c550,c530 c510; nuvi 680,670,660,650,610,600; zumo 550,500,450,400 | *$9.99 |
 | Duragadget® Mountain bike / moped / bicycle / bmx / motorbike / scooter gps satellite navigation handlebar mount holder for Tomtom go 520 720 920 520t 720t 920t 530 730 930 530t 730t 930t
Brand: DURAGADGET Part Number: 207+237a
Mountain bike holder for tomtom satnavs | *$16.99 |
 | Duragadget® Mountain bike / moped / bicycle / bmx / motorbike / scooter gps satellite navigation handlebar mount holder for tomtom one xl v1 classic regional europe
Brand: DURAGADGET Part Number: 207+236
Mountain bike holder for tomtom satnavs | *$16.99 |
 | Duragadget® Removable Swivel Air Vent Mount for Garmin Nuvi and Garmin StreetPilot 200, 205, 215, 250, 255, 265, 270, 275, 205t, 205t, 215t, 255t, 265t, 275t and 300, 300t, 310, 310t, 350, 360, 370,
Brand: DURAGADGET Part Number: 144ah | *$13.99 |
 | Duragadget® Screen protector for TomTom One XL, Tom Tom, 100% fits, Display Protection Film, PDA, Pocket PC
Brand: Duragadget® Part Number: 111_BBBB
Features - 4.2 inch Screen Protectors. Add a clear protective shield to your PDA / GPS units most fragile component- the screen. The days of adhesive backed screen protectors is over. These top quality 4.2" screen protectors are non sticky yet fix firmly and are designed to protect the screen of your unit from wear and tear caused by everyday use - a superb investment. PDA Screen Protectors 4.2" are silicon based and are washable. Each protector is tailor made for each PDA / GPS. Screen protectors are anti-glare and give your stylus a smoother navigating surface feel. These screen protectors are long lasting even during heavy use. Anti Glare, Finger Print Free, Protects touchscreen from scratches, Dust repelling, Washable and reusable, Smoother navigating surface feel, Easy to apply and replace with self adhering surface, Includes lint-free cleaning cloth and applicator card, Improves conduction to lcd. Only 1x protector in each pack. | *$4.99 |
| Duragadget® screen protector for widescreen Garmin nuvi models 200w 205w 215w250w 255w 200w 660 670 760t 760 770 765t 775t 775. Duragadget®
Brand: Duragadget® Part Number: 111_DDDD
Features - 4.2 inch Screen Protectors. Add a clear protective shield to your PDA / GPS units most fragile component- the screen. The days of adhesive backed screen protectors is over. These top quality 4.2" screen protectors are non sticky yet fix firmly and are designed to protect the screen of your unit from wear and tear caused by everyday use - a superb investment. PDA Screen Protectors 4.2" are silicon based and are washable. Each protector is tailor made for each PDA / GPS. Screen protectors are anti-glare and give your stylus a smoother navigating surface feel. These screen protectors are long lasting even during heavy use. Anti Glare, Finger Print Free, Protects touchscreen from scratches, Dust repelling, Washable and reusable, Smoother navigating surface feel, Easy to apply and replace with self adhering surface, Includes lint-free cleaning cloth and applicator card, Improves conduction to lcd. Only 1x protector in each pack. | *$4.99 |
 | Duragadget® Shock Resistant case Garmin Nuvi 1390t, 1390, 1350
Brand: DURAGADGET Part Number: 233azo
Garmin Hard EVA GPS case | *$14.99 |
 | Duragadget® Triple car cigarette lighter socket 12 volt dc for Blaupunkt travel pilot GPS satnav 100, 200, easy, 300,500 510 710 700
Brand: DURAGADGET Model: 70D mini usb car charger Part Number: 70D
6 way car cigarette socket | *$8.02 |
 | Duragadget® Windscreen mount / car holder for Navman S30 3D ( only 3d model) also compatible with Mio Moov 200 210
Brand: DURAGADGET Part Number: 167lo
Arkon's MM215 Mount is an ideal mounting solution for your Navman S30 3D GPS. The bundle includes the Travelmount® mini windshield suction pedestal (CM014-KST-2), the Dual T adapter plate (APMM200) and the 70mm circular adhesive console or dash disc (model AP036) Also compatible with Mio Moov 200 series PLEASE NOT THIS ONLY FITS THE 3D VERSION OF THE S30 IF YOU HAVE THE JUST THE S30 THIS WILL NOT FIT, THIS ONLY FITS THE S30 3D MODEL, | *$16.99 |
 | Dynon ADAHRS (Additional) for Skyview EFIS System
Brand: Dynon Part Number: SV-ADAHRS-201/A
ADAHRS stands for Air Data/Attitude/Heading Reference System. The SkyView ADAHRS module uses MEMS sensor technology to accurately measure inertial, magnetic, and air data. These provide the data necessary to drive the Artificial Horizon/Synthetic Vision, Airspeed, Altitude, Vertical Speed, Slip, Turn Rate, Angle of Attack, and Gyro-Stabilized Heading. Additionally, Outside Air Temperature is obtained from the SV-OAT-340 Sensor which is connected to the ADHARS.<br />
<br />
You may have one, two, or more ADAHRS in your SkyView System. If one fails, the backup ADHARS will provide data to the SkyView Display(s). To maintain complete redundancy, a separate SV-OAT-340 Sensor should be connected to each ADAHRS. Note that functionally, the SV-ADAHRS-200 and the SV-ADAHRS-201 are the same. The only difference is that the SV-ADAHRS-201 requires an SV-ADAHRS-200 in the same system in order to be activated. In the event that the SV-ADAHRS-200 is removed from the system, the SV-ADAHRS-201 will remain activated for an additional 30 flight hours before it becomes deactivated.<br />
<br />
A SkyView Network Cable is used to connect an ADAHRS Module to a Display. One ADAHRS will provide data to as many Displays as are connected in the SkyView System. However, for redundancy, you may want to provide one ADAHRS for each Display.<br />
<br />
<b>Each ADAHRS contains:</b><br />
3 - Pneumatic ports for Pitot, Static, and Angle of Attack<br />
1 - SV-OAT-340 Outside Air Temperature Sensor<br />
1 - 9-Pin DIN Connector for the SkyView Network<br />
2 - 2-Pin Connector for SV-OAT-340 Sensor<br />
<br />
The ADAHRS internal sensors measure rotational motion and acceleration about the CG of the aircraft. In order to be maintain accuracy, the ADAHRS should be mounted within six feet laterally (side-to-side) and twelve feet longitudinally (front-to-back) of the aircraft CG. Quite often the best place to mount the ADAHRS is in the fuselage behind the cockpit area. But other locations can work. | *$799.00 |
 | Dynon ADAHRS (First) for Skyview EFIS System
Brand: Dynon Part Number: SV-ADAHRS-200/A
ADAHRS stands for Air Data/Attitude/Heading Reference System. The SkyView ADAHRS module uses MEMS sensor technology to accurately measure inertial, magnetic, and air data. These provide the data necessary to drive the Artificial Horizon/Synthetic Vision, Airspeed, Altitude, Vertical Speed, Slip, Turn Rate, Angle of Attack, and Gyro-Stabilized Heading. Additionally, Outside Air Temperature is obtained from the SV-OAT-340 Sensor which is connected to the ADHARS.<br />
<br />
You may have one, two, or more ADAHRS in your SkyView System. If one fails, the backup ADHARS will provide data to the SkyView Display(s). To maintain complete redundancy, a separate SV-OAT-340 Sensor should be connected to each ADAHRS. Note that functionally, the SV-ADAHRS-200 and the SV-ADAHRS-201 are the same. The only difference is that the SV-ADAHRS-201 requires an SV-ADAHRS-200 in the same system in order to be activated. In the event that the SV-ADAHRS-200 is removed from the system, the SV-ADAHRS-201 will remain activated for an additional 30 flight hours before it becomes deactivated.<br />
<br />
A SkyView Network Cable is used to connect an ADAHRS Module to a Display. One ADAHRS will provide data to as many Displays as are connected in the SkyView System. However, for redundancy, you may want to provide one ADAHRS for each Display.<br />
<br />
<b>Each ADAHRS contains:</b><br />
3 - Pneumatic ports for Pitot, Static, and Angle of Attack<br />
1 - SV-OAT-340 Outside Air Temperature Sensor<br />
1 - 9-Pin DIN Connector for the SkyView Network<br />
2 - 2-Pin Connector for SV-OAT-340 Sensor<br />
<br />
The ADAHRS internal sensors measure rotational motion and acceleration about the CG of the aircraft. In order to be maintain accuracy, the ADAHRS should be mounted within six feet laterally (side-to-side) and twelve feet longitudinally (front-to-back) of the aircraft CG. Quite often the best place to mount the ADAHRS is in the fuselage behind the cockpit area. But other locations can work. | *$1,199.00 |
 | Dynon AOA/Pitot Boom-Mount (Unheated) Angle-of-attack/Pitot Probe
Brand: Dynon Part Number: 100532-000
As most GA aircraft do not provide a way to directly measure this critical flight parameter, angle of attack usually becomes an academic notion which is not thought about while flying. Dynon Avionics was the first EFIS manufacturer to realize the importance of angle of attack and offer an affordable, accurate, and useful way to monitor it.<br />
<br />
<b>Dynon Avionics' AOA/Pitot Probe</b><br />
Dynon Avionics was the first manufacturer of affordable EFIS products to offer a way to measure angle of attack. Through extensive wind tunnel testing, Dynon is able to offer an angle of attack (AOA) pitot probe that measures both angle of attack and airspeed when connected to any of our EFIS-based products. <br />
<br />
<b>Principle of Operation</b><br />
The concept behind Dynon's design is illustrated in the diagrams at right. The Dynon Avionics AOA/Pitot probe performs two functions: airspeed sensing and angle of attack sensing. These functions require having two pressure ports on the tip of the probe. The normal pitot pressure port is on the front face of the probe and is designed to be insensitive to angle of attack. The second pressure port is located on an angled surface just under the pitot port and is designed to be very sensitive to AOA. The pressure from each port is delivered via separate air lines to the instrument where they are compared to previously calibrated scenarios specific to that aircraft.<br />
<br />
<b>Easy Installation and Calibration</b><br />
Unlike other angle of attack instruments available to homebuilders, the Dynon AOA/Pitot probe does not require you to drill special ports in wing skins. It also does not have any moving parts such as vanes. It is simply an AN5812-style pitot tube with an additional pressure port to measure AOA. Simply use it as a normal pitot tube. The only difference is a second plumbing line which runs back to the instrument for AOA calculation. | *$209.00 |
 | Dynon AOA/Pitot L-Shape (Unheated) Angle-of-attack/Pitot Probe
Brand: Dynon Part Number: 100141-000
As most GA aircraft do not provide a way to directly measure this critical flight parameter, angle of attack usually becomes an academic notion which is not thought about while flying. Dynon Avionics was the first EFIS manufacturer to realize the importance of angle of attack and offer an affordable, accurate, and useful way to monitor it.<br />
<br />
<b>Dynon Avionics' AOA/Pitot Probe</b><br />
Dynon Avionics was the first manufacturer of affordable EFIS products to offer a way to measure angle of attack. Through extensive wind tunnel testing, Dynon is able to offer an angle of attack (AOA) pitot probe that measures both angle of attack and airspeed when connected to any of our EFIS-based products. <br />
<br />
<b>Principle of Operation</b><br />
The concept behind Dynon's design is illustrated in the diagrams at right. The Dynon Avionics AOA/Pitot probe performs two functions: airspeed sensing and angle of attack sensing. These functions require having two pressure ports on the tip of the probe. The normal pitot pressure port is on the front face of the probe and is designed to be insensitive to angle of attack. The second pressure port is located on an angled surface just under the pitot port and is designed to be very sensitive to AOA. The pressure from each port is delivered via separate air lines to the instrument where they are compared to previously calibrated scenarios specific to that aircraft.<br />
<br />
<b>Easy Installation and Calibration</b><br />
Unlike other angle of attack instruments available to homebuilders, the Dynon AOA/Pitot probe does not require you to drill special ports in wing skins. It also does not have any moving parts such as vanes. It is simply an AN5812-style pitot tube with an additional pressure port to measure AOA. Simply use it as a normal pitot tube. The only difference is a second plumbing line which runs back to the instrument for AOA calculation. | *$209.00 |
 | Dynon AP74 (Horizontal) Dedicated Autopilot Interface Module
Brand: Dynon Part Number: 100852-001
The AP74 Dedicated Autopilot Interface Module adds panel-mounted controls and LED light status indicators to your autopilot. A multi-purpose value knob allows quick adjustment of the BARO setting and the bugs used with the Autopilot. The AP74 adds the abilities to pre-arm which modes will be flown upon autopilot engagement and pre-select the target altitude and heading/track. Additional features include a built-in light level sensor to automatically adjust the screen brightness, and synthetic voice alerts when connected to an auxiliary input on your intercom. | *$449.00 |
 | Dynon AP74 (Vertical) Dedicated Autopilot Interface Module
Brand: Dynon Part Number: 100852-000
The AP74 Dedicated Autopilot Interface Module adds panel-mounted controls and LED light status indicators to your autopilot. A multi-purpose value knob allows quick adjustment of the BARO setting and the bugs used with the Autopilot. The AP74 adds the abilities to pre-arm which modes will be flown upon autopilot engagement and pre-select the target altitude and heading/track. Additional features include a built-in light level sensor to automatically adjust the screen brightness, and synthetic voice alerts when connected to an auxiliary input on your intercom. | *$449.00 |
 | Dynon BACKUP BATTERY for Skyview EFIS System
Brand: Dynon Part Number: SV-BAT-320
<b>System Battery Backup</b><br />
A system backup battery will provide over an hour of backup power to a Display and Modules. Each Display requires its own Backup Battery for redundancy.<br />
<br />
<b>Connection</b><br />
The SkyView Main Harness, included with each display, includes a lead and connector to attach to the SV-BAT-320.<br />
<br />
<b>Mounting</b><br />
The SV-BAT-320 should be mounted in the avionics bay, near the SkyView display. | *$189.00 |
 | Dynon EFIS-D100 System
Brand: Dynon Part Number: 100533-000
<b>The EFIS-D100 system includes the following:</b><br />
* EFIS-D100 Instrument<br />
* Mounting Tray<br />
* Remote Compass<br />
* USB-Serial Converter for connection to USB equipped PCs<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Additional Options:</b><br />
* Autopilot<br />
* AOA/Pitot<br />
* Li-Ion Backup Battery<br />
* Wiring Harness<br />
* OAT Probe for dynamic DA & TAS<br />
* Altitude Encoder Converter<br />
* Super-Bright Screen<br />
* HS34 HSI Expansion Module | *$2,399.00 |
| Dynon EFIS-D100 System w/Super-Bright Screen
Brand: Dynon Part Number: 100533-001
<b>The EFIS-D100 system includes the following:</b><br />
* EFIS-D100 Instrument<br />
* Mounting Tray<br />
* Remote Compass<br />
* USB-Serial Converter for connection to USB equipped PCs<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Additional Options:</b><br />
* Autopilot<br />
* AOA/Pitot<br />
* Li-Ion Backup Battery<br />
* Wiring Harness<br />
* OAT Probe for dynamic DA & TAS<br />
* Altitude Encoder Converter<br />
* HS34 HSI Expansion Module | *$2,599.00 |
 | Dynon EFIS-D6 System
Brand: Dynon Part Number: 101223-000
<b>Items supplied with each EFIS-D6 include:</b><br />
* EFIS-D6 Instrument<br />
* EDC-10A Remote Compass<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Additional Options:</b><br />
* Angle of Attack/Pitot<br />
* Li-Ion Backup Battery<br />
* Wiring Harness<br />
* Altitude Encoder Converter | *$1,599.00 |
 | Dynon EFIS-D60 System w/Super-Bright Screen
Brand: Dynon Part Number: 101225-000
<b>Items supplied with each EFIS-D6 include:</b><br />
* EFIS-D60 Instrument<br />
* Mounting Tray<br />
* EDC-10A Remote Compass<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Additional Options:</b><br />
* Angle of Attack/Pitot<br />
* Li-Ion Backup Battery<br />
* Wiring Harness<br />
* Altitude Encoder Converter | *$1,899.00 |
 | Dynon EMS-D10 System
Brand: Dynon Part Number: 100537-000
<b>The EMS-D10 system includes the following:</b><br />
* EMS-D10 Instrument<br />
* Mounting Accessories<br />
* Accessories Pack<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Options:</b><br />
* Engine Probe Kits<br />
* Flush Mount Bracket<br />
* Fuel Flow Sensor | *$1,699.00 |
 | Dynon EMS-D120 System
Brand: Dynon Part Number: 100566-000
<b>The EMS-D120 system includes the following:</b><br />
* EMS-D120 Instrument<br />
* Mounting Tray<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Options:</b><br />
* Engine Probe Kits<br />
* Fuel Flow Sensor<br />
* USB-Serial Converter<br />
* Super-Bright Screen | *$1,999.00 |
 | Dynon ENGINE MONITORING MODULE for Skyview EFIS System
Brand: Dynon Part Number: SV-EMS-220/A
The SV-EMS-220 Module provides the interface between a SkyView Display and the engine and aircraft sensors. It allows the SkyView System to continuously monitor all power plant and aircraft systems in a highly automated manner. The EMS Module integrates up to 16 different types of gauges all in one highly compact design. Any parameter falling outside its predefined limits are automatically brought to the attention of the pilot for immediate remediation. Safety is enhanced two fold; first, by reducing the pilot's workload and secondly by early detection and notification of foreseen trouble.<br />
<br />
<b>Flexibility</b><br />
SkyView is highly configurable for you to design the exact Engine Monitoring display you want. Common engine configurations come standard, but an easy to use setup menu allows you to choose exactly which sensors, displays, ranges and alarms you want.<br />
<br />
<b>Some of the parameters you can measure with the SkyView EMS include:</b>
* Tach<br />
* Manifold Pressure<br />
* Oil Pressure<br />
* Oil Temperature<br />
* Fuel Flow<br />
* Fuel Pressure<br />
* CHT<br />
* EGT<br />
* Voltage<br />
* Current<br />
<br />
<b>Mounting</b><br />
The SV-EMS-220 should be mounted in the avionics bay near the firewall. NOTE: it cannot be mounted on the engine side of the firewall.<br />
<br />
<b>Connections</b><br />
The SV-EMS-220 has two connectors, a D37 and a D25. The D37 contains dedicated RPM, Voltage, Fuel Flow, Current, MAP, and general purpose inputs. The D25 has twelve temperature inputs. The EMS Module is connected to a SkyView Display via a D9 connector.<br />
<br />
<b>Engine Sensor Kits</b><br />
The SV-EMS-220 can use the Dynon Engine Sensor Kits for the 4 and 6 cylinder Lycoming, Continental, Jabiru, and Rotax engines. The Wiring Harnesses supplied with these kits fit the SV-EMS-220 connectors. Other engines are supported, although the installer will have to determine the correct sensors and wiring to connect to the EMS Module. | *$599.00 |
 | Dynon FLIGHTDEK-D180 System
Brand: Dynon Part Number: 100565-000
<b>The FlightDEK-D180 system includes the following:</b><br />
* FlightDEK-D180 Instrument<br />
* Mounting Tray<br />
* EDC-10A Remote Compass<br />
* USB-Serial Converter for connection to USB equipped PCs<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Options:</b><br />
* Autopilot<br />
* Angle of Attack/Pitot<br />
* Li-Ion Backup Battery<br />
* Engine Probes/ Packages<br />
* Altitude Encoder Converter<br />
* OAT for dynamic TAS & DA<br />
* Primary Instrument Wiring Harness<br />
* Super-bright screen<br />
* HS34 HSI Expansion Module<br /> | *$3,199.00 |
| Dynon FLIGHTDEK-D180 System w/Super-Bright Screen
Brand: Dynon Part Number: 100565-001
<b>The FlightDEK-D180 system includes the following:</b><br />
* FlightDEK-D180 Instrument<br />
* Mounting Tray<br />
* EDC-10A Remote Compass<br />
* USB-Serial Converter for connection to USB equipped PCs<br />
* Installation Guide<br />
* Pilot User Manual<br />
<br />
<b>Options:</b><br />
* Autopilot<br />
* Angle of Attack/Pitot<br />
* Li-Ion Backup Battery<br />
* Engine Probes/ Packages<br />
* Altitude Encoder Converter<br />
* OAT for dynamic TAS & DA<br />
* Primary Instrument Wiring Harness<br />
* HS34 HSI Expansion Module<br /> | *$3,399.00 |
 | Dynon HS34 (Horizontal) HSI Expansion Module
Brand: Dynon Part Number: 100790-000 | *$649.00 |
 | Dynon RV-10 Autopilot Pitch Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-007
<b>The RV-10 Pitch Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-10 Pitch<br />
SV42 Servo | *$825.00 |
| Dynon RV-10 Autopilot Roll Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-006
<b>The RV-10 Roll Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-7/8/10 Roll <br />
SV42 Servo | *$825.00 |
| Dynon RV-4/8 Autopilot Pitch Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-005
<b>The RV-4/8 Pitch Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-4/8 Pitch<br />
SV32 Servo | *$825.00 |
| Dynon RV-6 Autopilot Roll Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-001
<b>The RV-6 Roll Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-6 Roll<br />
SV32L Servo | *$825.00 |
| Dynon RV-6/7/9 Autopilot Pitch Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-004
<b>The RV-6/7/9 Pitch Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-6/7/9 Pitch<br />
SV32 Servo | *$825.00 |
| Dynon RV-7/8 Autopilot Roll Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-002
<b>The RV-7/8 Roll Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-7/8/10 Roll</b><br />
SV32 Servo | *$825.00 |
| Dynon RV-9 Autopilot Roll Servo + Mounting Kit Package
Brand: Dynon Part Number: 101098-003
<b>The RV-9 Roll Servo + Mounting Kit Package includes:</b><br />
Servo Mounting Kit - RV-9 Roll<br />
SV32 Servo | *$825.00 |
 | Dynon SKYVIEW D1000 EFIS SYSTEM Bundle (Display & Harness)
Brand: Dynon Part Number: SV-D1000/B
SkyView continues the Dynon tradition of technologically advanced GA aircraft with the next generation of glass panels, offering redundant networks and systems, incredibly bright screens, design flexibility, and future upgradability unsurpassed by anything else flying.<br />
<br />
The SkyView displays are very bright, high-resolution screens driven by advanced graphics processors create highly visible and readable display, even in direct sunlight! They are the heart of the SkyView system, and contain the main control CPU, graphics processor, and terrain data-base. Both the 7" and 10" displays are identical in functionality, with the only difference being screen size.<br />
<br />
SkyView Displays utilize TFT active matrix LCD screens and LED backlighting technology for increased life span, more uniform brightness, and reduced power consumption.<br />
<br />
The SkyView System is designed for ease of use while flying. The most used functions are accessed via two rotary/multi-direction Joysticks, for fast intuitive commands. Almost all other in flight commands, using the widely spaced buttons, are only two button presses away. None or more than three button presses.<br />
<br />
If two displays are in the system, either one can act as the Primary Flight Display, Moving Map, and Engine Monitor. The unlikely loss of either display will not affect the functionality of the other.<br />
<br />
A system backup battery (purchased separately) will provide over an hour of backup power to a Display and Modules. Each Display requires its own Backup Battery for redundancy.<br />
<br />
<b>Each display contains:</b><br />
1 - 37-Pin DIN Connector for the main wiring harness<br />
2 - 9-Pin DIN Connector for the SkyView Networks<br />
2 - USB Connectors<br />
1 - Ethernet Connector (currently unused)<br />
<br />
<b>A main wiring harness is included with each display. It connects to the display via the D37 connector.</b> | *$3,589.00 |
 | Eagle Cuda 300 Fishfinder
Brand: Eagle Model: 000-0110-92 Part Number: 000-0110-92
The newest addition to the Cuda family. The Cuda 300.This successor shows exactly why many anglers before have chosen for a Fishfinder from this series! The 6 inch screen with 240x160 pixels give a detailed view of both fish and bottomprofile. The greyline shows the composition of the bottom very clearly and the 60° degrees sonar make no fish unrevealed till 180m Temperature gauge, back ground lighting and zoomfunction make this fishfinder complete! | *$90.72 |
 | Eagle Fisheasy 350C Fishfinder
Brand: Eagle Model: 000-0116-37 Part Number: 123-59
Astounding daylight color and fishfinder performance in this incredibly affordable compact package exclusively from Eagle! | *$199.99 |
 | Eagle Fishelite 640C GPS Unit
Brand: Eagle Model: 000-0123-28 Part Number: 123-28
The fullsize, high-definition, 256-color, 640Vx480H pixel, TFT display makes this combo 200 kHz sonar & mapping GPS+WAAS unit the choice of the pros! | *$406.99 |
|
|
|
|