 | 1 3/4 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-265
1-3/4" Bore Stud Mount Double Acting | *$56.09 |
 | 1/2 Bore x 1 1/2 Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-55
1/2" Bore Universal Mount Double Acting | *$19.63 |
| | 1/2 Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-25
1/2" Bore Stud Mount Double Acting | *$15.84 |
| 1/2 Bore x 1. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-50
1/2" Bore Universal Mount Double Acting | *$18.37 |
| | 1/2 Bore x 1/2 Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-20
1/2" Bore Stud Mount Double Acting | *$15.10 |
| | 1/2 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-35
1/2" Bore Stud Mount Double Acting | *$17.34 |
 | 1/2 NPT Inlet Port, 1/2 NPT Cyl. Port, 1/2 NPT Exaust Port, 450 SCFM Flow, Parker Quick Exhaust and Shuttle Valves w/Urethane DiaPhram (1 Each)
Brand: Reid Supply Company Part Number: MFP-215
Quick Exhaust and Shuttle Valves With Urethane Diaphragm | *$58.29 |
 | 1/2 NPT Port, 85.3 SCFM Flow, ARO Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-390
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$34.81 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 16 Port, 2.50 Hex. x 19. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-220
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$106.68 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-16
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$77.29 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 16 Port, w/Solid Plug in center, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-20
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$84.74 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-04
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$46.22 |
| | 1/2 NPT Ports, 1 1/2 Inlet, 4 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-24
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$46.22 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 8 Port, 2.50 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-309
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$76.71 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 8 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-08
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$60.19 |
 | 1/2 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-250
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
 | 1/2 NPT Ports, 1. NPT Inlet, 6 Port, 2.25 W x 14.25 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-360
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$58.13 |
 | 1/2 NPT, 1.88 OAL, Parker Exhaust Mufflers (1 Each)
Brand: Reid Supply Company Part Number: MFP-203
Exhaust Port Mufflers | *$15.31 |
 | 1/2 NPT, 2.31 Lg. Open, 7/8 Hex., Parker Muffler / Speed Controls (1 Each)
Brand: Reid Supply Company Part Number: MFP-332
Muffler/Speed Control | *$20.47 |
 | 1/2 NPT, 282.0 SCFM Flow, Parker Check Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-307
Needle, Check and Flow Control Valves | *$49.03 |
 | 1/2 NPT, 3-Way, Parker Lockout Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-342
Lockout Valves Three-Way - Lockout valves are made of cast aluminum alloy with a metal handle for durability. Bright color for high visibility. Complies with O.S.H.A. Standard 29 CFR part 1910. Operating pressure range of 0 to 250 psi and a temperature range of 32°F to 160°F. Cv range of 3.0 to 10.0. All valves have a 1" exhaust port. All parts have a silencer included. | *$216.00 |
 | 1/2 NPT, 3.19 OAL, Parker Exhaust Port Silencers (1 Each)
Brand: Reid Supply Company Part Number: MFP-212
Exhaust Port Silencers | *$21.87 |
 | 1/2 NPT, 55.2 SCFM Flow, Parker Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-311
Needle, Check and Flow Control Valves | *$99.27 |
 | 1/2 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-358
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$54.19 |
 | 1/2 NPT, Parker Piggy Back Filter / Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-368
"Piggyback" Filter/Regulators with Gauge - Integral filter/regulator "piggybacks" are an excellent choice where accurate pressure regulation and high moisture removal efficiency are required in a space saving package. Pressure rating 150 psi and a temperature range of 32°F to 125°F. Polycarbonate bowl and manual drain are standard on units. 67 SCFM flow rate. Comes with a 40 micron filter. | *$94.41 |
 | 1/2 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-366
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.99 |
 | 1/2" Barb x 3/8" Od Angle Stop Chrome
Brand: Zurn Model: QQTV60XNPK1 Part Number: QQTV60XNPK1
"QEST" PEX ANGLE CHROME STOP VALVE
1/2" Barb inlet x 3/8" OD compression (5/8" OD PEX)
For hot/cold water only
Use crimp rings (Ace No. 4092987) sold separately
NSF approved
Bagged | *$4.49 |
 | 1/2-20 Fine Thd., Parker Piston Rod Clevises, Use w/Cylinder Bore Size 2. (1 Each)
Brand: Reid Supply Company Part Number: MFP-123
Accessories - Piston Rod Clevises | *$9.51 |
| | 1/2-20 Thd., Rod Clevis Assemblies, Use w/Bore Sizes 2., 2 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-670
Rod Clevis Assemblies | *$7.31 |
 | 1/4 NPT Connection, 1. x 1. x 2.2 Size, Parker Timer Base for Time Delays Relays (1 Each)
Brand: Reid Supply Company Part Number: MFP-485
Time Delays Relays - Requires timer sub base. (Sold separately). | *$30.21 |
| 1/4 NPT Inlet Port, 1/4 NPT Cyl. Port, 1/4 NPT Exaust Port, 90 SCFM Flow, Parker Quick Exhaust and Shuttle Valves w/Urethane DiaPhram (1 Each)
Brand: Reid Supply Company Part Number: MFP-213
Quick Exhaust and Shuttle Valves With Urethane Diaphragm | *$30.24 |
 | 1/4 NPT Port, 10-32 Pilot Port, Parker Blocking Valves w/Threaded Connection (1 Each)
Brand: Reid Supply Company Part Number: MFP-488
Blocking Valves w/Threaded Connection - Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0 -150 psi with a temperature range of 5°F to 140°F. Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68°F, dry air and 1 Hz operating frequency. | *$85.69 |
 | 1/4 NPT Port, 14 SCFM Flow, 2-120 Spring Range, ARO Precision Air Regulators (1 Each)
Brand: Reid Supply Company Part Number: ARO-5
Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
| 1/4 NPT Port, 14 SCFM Flow, 2-25 Spring Range, ARO Precision Air Regulators (1 Each)
Brand: Reid Supply Company Part Number: ARO-15
Precision Air Regulators - High precision multi-stage pressure regulators. Controls output pressure with an accuracy of 0.1%, and very low sensitivity to changes in supply pressure and flow. High degree of regulation and repeatability are achievable by reacting to down stream pressure fluctuations as small as 0.01 psi above set pressure. Movement as small as 0.0001 inches will cause main valve to correct to the proper position. At start up, regulated pressure will return to its output setting, even after long down times. Maximum pressure 150 psi. Temperature rating 20°F to 150°F. | *$106.19 |
 | 1/4 NPT Port, 24.9 SCFM Flow, ARO Flow Control Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-360
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$22.53 |
| 1/4 NPT Port, 24.9 SCFM Flow, ARO Needle Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-380
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$20.38 |
 | 1/4 NPT Port, 29.5 SCFM Flow, ARO Check Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-500
Composite Needle, Check and Flow Control Valves - Composite body is 30% glass filled polyester. Tough and corrosion resistant. Color-coded micrometer and calibrated adjustment knob provide instant reference points. Press red locking ring down to prevent adjustment. Operating temperature is 0°F to 200°F. Operating pressure is 200 psi. max. | *$18.43 |
| 1/4 NPT Ports, 1. Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-13
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$59.15 |
| 1/4 NPT Ports, 1. Inlet, 4 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-01
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$28.50 |
| 1/4 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-221
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$61.21 |
| 1/4 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-321
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$67.06 |
 | 1/4 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-421
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$67.06 |
| 1/4 NPT Ports, 1. Inlet, 8 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-05
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$41.14 |
| | 1/4 NPT Ports, 1. Inlet, 8 Port, Nylon Manifolds, White (1 Each)
Brand: Reid Supply Company Part Number: NM-25
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$41.14 |
| 1/4 NPT Ports, 1. Inlet, 8 Port, w/Solid Plug in center, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-09
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$47.16 |
| 1/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-230
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
 | 1/4 NPT Ports, 1. NPT Inlet, 8 Port, 2.25 W x 18.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-440
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$77.59 |
 | 1/4 NPT Ports, 120 V AC, Three Position Double Closed Center Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-433
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$153.69 |
| 1/4 NPT Ports, 120 V AC, Two Position Double Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-427
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$134.96 |
| 1/4 NPT Ports, 120 V AC, Two Position Single Type, Parker Directional Solenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: MFP-425
Directional Solenoid Valves - Parker valves are high performance valves that utilize the WCS (Wear Compensation System) to provide wear compensated sealing for non-lube service through millions of cycles. Valves are ideal for packaging, assembly and factory floor automation applications. Instructions included. | *$153.69 |
|
