 | Traditional Inlay Banding
Brand: Rockler
Made of Real Wood! 1/2" wide x 36" long and approximately 1/20" thick. Easy to apply. br brApplying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Glue the banding into the groove. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it. | *$9.19 |
 | Traffic Cone - 13" x 28" - Orange Safety Cone
Brand: WS-LOG Model: TC28TS Part Number: TC28TS
Mark hazardous areas, alert drivers, and prevent accidents with an easy-to-see cone. Fluorescent, fade-resistant orange color is highly visible on cloudy or sunny days. One-piece vinyl construction stands up to all weather conditions and traffic situations. 1,200 psi tensile strength; 250 psi tear strength. Will not melt in temperatures up to 160°F. High-density, square PVC base provides superior stability. Multiple cones stack easily when not in use. Engineered to meet MUTCD specifications. | *$15.90 |
 | Travel Smart TS31LHT Ladderkart Professional Grade Stepladder
Brand: Travel Smart Model: TSM-31LHT Part Number: TSM31LHT
Franzus Travel Smart Ladderkart Professional Grade Stepladder and Hand Truck is lightweight and flat folding for easy storage and transport. It has a lightweight strong aluminum frame that folds to 6.5" flat. It has a 300 lb. weight capacity for the stepladder and a 250 lb. weight capacity for the hand truck. | *$46.95 |
 | TREE SAVER WINCH STRAP 10'
Brand: Tuff Stuff Part Number: TSTS10
10' tree strap is made from the highest grade material to pull you out of the most difficult situation without killing the trees. Use for winching other vehicles out of trouble. Excellent quality at a low cost | *$25.00 |
 | TREE SAVER WINCH STRAP 30'
Brand: Tuff Stuff Part Number: TSTS30
Tree Saver Strap w/ Loop Ends 30ft long with high quality material . 30,000lb Capacity with heavy duty Poly Straps with Sewn in - Tie Downs | *$35.00 |
 | Tricam AUL-2 UltraLight Aluminum 2-Step Stool
Brand: Tricam Model: AUL-2 | *$39.38 |
 | Tricam AUL-3 Lite Step Aluminum 3-Step Stool
Brand: Tricam Model: AUL-3 | *$42.69 |
 | Tricam GOR200G 600-Pound Capacity Gorilla Carts Dumping Cart
Brand: Tricam Model: GOR200 Part Number: GOR200
"GORILLA CARTS" PLASTIC GARDEN DUMP CART
600 pound load capacity
Ideal for yard and landscaping projects
Balanced dumping for quick unloading
Durable molded bed will not rust
Bed size: 7-1/2"H x 19-3/4"W x 36-1/4"L
10" pneumatic tires.
Straight pull handle. | *$89.99 |
 | Tricam GOR209-W 600-Pound Capacity Gorilla Carts Dumping Cart - Green
Brand: Tricam Model: GOR209-W | *$89.99 |
 | Tricam HSP-1G 200-Pound Capacity Skinny Mini Stool with Comfort Grip, 1-Step
Brand: Tricam Model: HSP-1G | *$24.45 |
 | Tricam HSP-1W Skinny Mini 200-Pound Capacity ANSI Type III Stool with Safety Hoop, 1-Step
Brand: Tricam Model: HSP-1W | *$23.36 |
 | Tricam HSP-2G 200-Pound Capacity Skinny Mini Stool with Comfort Grip, 2-Step
Brand: Tricam Model: HSP-2G | *$33.39 |
 | Tricam HSP-2W Skinny Mini 2-Step Stool, ANSI Type III, 200-Pound Capacity
Brand: Tricam Model: HSP-2W Part Number: HSP-2W
2 Step Mini Step Stool | *$20.23 |
 | Tricam HSP-3G 200-Pound Capacity Skinny Mini Stool with Comfort Grip, 3-Step
Brand: Tricam Model: HSP-3G Part Number: -3
######################################## ######################################## ######################################## ######################################## ######################################## ######################################## ############### | *$44.36 |
 | Tricam HSP-3TG 200-Pound Capacity Skinny Mini Stool with Project Tray and Grip, 3-Step
Brand: Tricam Model: HSP-3TG | *$46.00 |
 | Tricam PLAT-08 300-Pound Capacity Standing Platform for Gorilla Ladders
Brand: Tricam Model: PLAT-08 | *$19.99 |
 | Tricam TR-2W-HB 200-Pound Capacity ANSI Type III Highback Step Stool, 2-Step
Brand: Tricam Model: TR-2W-HB Part Number: TR-2W-HB
The 2 step steel step stool is designed with oversized steps and a high hoop back for added stability and safety. Lightweight durable steel frame and oversized steps with PVC safety tread inserts. ANSI Type III, 200 lb. rating. Backed by a 1 year warranty | *$25.59 |
 | Trimmer Heavy Duty Extra Large Shopping Cart, Red
Brand: Trimmer Model: H2004-Rd Part Number: H2004-Rd
This heavy duty extra large foldable shopping cart is ideal for carrying groceries or laundry. It's easy to assemble and folds flat for storage. Red. | *$50.00 |
 | Triton Products 028 Bin Kits for Pegboard Storage, Yellow, 16-Pieces
Brand: Triton Model: 028 Part Number: 021
Store all of your loose parts in these convenient, easily removable plastic hanging bins and mounting hardware. Never search drawers or jars again for the item you need! Set includes eight yellow plastic hanging bins, and eight patented BinClips for easy hanging on any pegboard system. Bins are easily removable for transport of small or loose parts. Use in conjunction with DB2 and DBC4 | *$14.03 |
 | Triton Products 1583-2 CraftHook Locking Pegboard Hook Assortment with Bins
Brand: Triton Model: 1583-2 Part Number: 1583-2
These 1/4" polypropylene pegboards are impact resistant and waterproof, virtually indestructible and ideal for humid or damp environments. This set includes two 24" x 48" boards that can be mounted anywhere in the garage or outside for tool storage and organization. The white back is ideal for creating a tool shadowing system and the boards can be trimmed for a custom fit. These peg boards hold three times the weight of ordinary pegboards, and will last much longer. Peg Hooks are not included, but can be purchased separately. Assembly level/degree of difficulty: Easy. | *$39.00 |
 | Triton Products 532-2 DuraHook Large Style Pegboard Hook Assortment
Brand: Triton Model: 532-2 Part Number: 532-2 | *$44.99 |
 | Triton Products 76126-2 DuraBoard Steel Pegboard Shelves
Brand: Triton Model: 76126-2 Part Number: 76126-2
Heavy-duty blue epoxy shelf installs easily and locks into place on both 1/8in. and 1/4in. pegboards. Can also be installed on plywood or hollow wall structures. U.S.A. 2-year limited warranty. | *$19.99 |
 | Triton Products 76901 DuraHook Pegboard Hook Assortment, 26-Piece
Brand: Triton Model: 76901 Part Number: 76901
Pegboard Kits/assortments - Hooks For Use With: Pegboards Number of Pieces: 24 Hooks, 2 bins 2 bin clips | *$16.62 |
 | Triton Products 76995 DuraHook Pro-Series Pegboard Hook and Bin Assortment
Brand: Triton Model: 76995 Part Number: 76995
The DuraHook pegboard hook and plastic bin assortment allows you to customize your pegboard storage system. DuraHook double-locking system ensures hooks never fall out, even after repeated use. | *$46.37 |
 | Triton Products 994 DuraHook Heavy Duty Pegboard Storage System
Brand: Triton Model: 994 Part Number: 994
The DuraPro Complete Wall Storage System includes everything you need to create a secure and flexible wall storage system in your shop or garage. Kit has four polypropylene pegboards, 44 assorted locking hooks, bin clips, hanging bins and more. | *$64.40 |
 | Triton Products DB-2 DuraBoard 2-Sheets 24-by-48-Inch Pegboard
Brand: Triton Model: DB-2 Part Number: DB-2
A heavy-duty, translucent white polypropylene pegboard with 3 times greater holding power than traditional pegboards. Board surface is ideal for creating tool silhouettes. True 1/4in. thick. Durable, washable and weather resistant. 9/32in. hole size; 1in. hole spacing. For use with DuraHook pegboard hooks or standard pegboard hooks. U.S.A. 2-year limited warranty. | *$82.43 |
 | Triton Products LB1-Kit LocBoard Steel Square Hole Pegboard Kit, 46-Piece Hook Assortment
Brand: Triton Model: LB1-Kit Part Number: LB1-W
LocBoard steel pegboard with square hole offers the ultimate confidence and flexibility for all industrial storage needs. Accommodates all LocHooks hooks and bin clips. White epoxy powder coat. U.S.A. | *$89.99 |
 | Triton Products TPB-36 48-by-24-by 1/4-Inch Tempered Hardboard Pegboard with 26-Piece Hook Assortment and All Mounting Hardware
Brand: Triton Model: TPB-36 Part Number: TPB-36 | *$33.99 |
 | Triton SJA200 Superjaws Workbench
Brand: Triton Model: SJA200
Clamping and releasing your work has never been faster or easier. The adjustment of the jaw opening is instantaneous, this is not a screw vise so there are no handles to wind. Simply slide the moving jaw up to the work piece and press the foot pedal to apply the right amount of clamping force. To unlock, push the release plate for instant release. The clamping range is from 0-35" and the mechanism is capable of clamping forces well over 2000 pounds but the user can regulate the pressure by applying light pressure on the foot pedal. Due to the 3 legged design it is incredibly stable on all surfaces and it can hold large and awkward pieces with the optional log gripping jaws. Superjaws is sold fully assembled and it is ready for use in about 20 seconds. It is easily folded for transportation and storage. | *$154.99 |
 | Trojan BRS-10 Adjustable 24-Inch to 40-Inch Multi-Directional 8 Point Pedestal Roller Stand
Brand: Trojan Model: BRS-10 | *$79.33 |
 | Trojan DC-9 Dolly-Cartin' 2 Wheeled Clamping Cart Unit with 9-Inch Clamping Capacity
Brand: Trojan Model: DC-9 | *$131.41 |
 | Trojan PV-20 Wall Puller Flat Bar Lever with 20-Inch Handle and 8-Inch Hook
Brand: Trojan Model: PV-20 Part Number: PV-20
The Trojan PV-20 Wall Puller is an indespenable tool for framers or anyone else trying to move a stud wall into position. Using the Pee-Vee's leverage pull the foot of a wall in line rather than beating on the opposite side with a sledge hammer has numerous advantages. The 20" handle gives you plenty of leverage for a variety of other jobs too. The PV-20 is a handy addition to anyones toolbox. Proudly designed and made here in America. | *$25.95 |
 | Trojan RS-12 Adjustable 24-Inch to 40-Inch Multi-Directional Pedestal Roller Stand with 12-Inch Roller
Brand: Trojan Model: RS-12 Part Number: RS-12
The Trojan RS-12 Roller Stand is the perfect "Extra Hand" when support of long boards that extend beyond your saw table is needed. Unlike other stands that tilt more and more off-center the higher they are adjusted, the RS-12 utilizes Trojan's Patented Base Design, which always keeps the roller centered over the base for maximum stability. Quickly folds flat for convenient storage too. Proudly designed and made here in America. Weight Capacity: 75 pounds | *$56.70 |
 | Trojan RS-15 Adjustable 24-Inch to 40-Inch Multi-Directional Pedestal Roller Stand with 15-Inch Roller
Brand: Trojan Model: RS-15 Part Number: RS-15
The Trojan RS-15 Roller Stand has the same great features as the RS-12 stand, but with a wider 15" roller and larger 1-1/4" steel tube base, features which make this stand even more rugged and stable. A perfect choice for use in a professional shop where extra support of long boards is needed. Unlike other stands that tilt more and more off-center the higher they are adjusted, the RS-15 utilizes Trojan's Patented Base Design, which always keeps the roller centered over the base for maximum stability. Quickly folds flat for convenient storage too. Proudly designed and made here in America. Weight Capacity: 150 pounds | *$71.00 |
| | Trojan TWC-35 35-Inch Tall Work Center, 2 by 6 Not Included
Brand: Trojan Model: TWC-35 Part Number: TWC-35
The Trojan Work Center is so easy to set up, in just seconds you've got a work station that keeps you and your work off the ground. Ball bearing rollers adjust to the proper height and make material feed easily. The rollers stow conveniently with the table to make a briefcase size unit to carry between jobs. The work center is suitable for use with miter saws, planers, table saws, drill presses, radial saws, extra horses, etc. Trojan TWC35 35" Tall Work Center. Includes: Sawhorse legs, 2 roller brackets, saw table, Additional rollers available (model TR-10). Saw NOT Included. | *$159.60 |
 | Troy 4-Foot Extension for Red Line Dry Wall Panel Lift
Brand: Troy Model: DPH-X
Easy to Install and features All Welded Steel Construction. Adds 4' to the heights of the DPH11 TPH11 Drywall Lift. Specifications Installed on the DPH11 TPH11 Drywall Lift: 15 Maximum Reach for horizontal ceilings (Angled ceilings will have a higher working peak heights, the added heights will vary with pitch). 19 Maximum Reach for walls (This is determined by the 15' max lift and half the length of drywall). 4 x 16 Single Sheet Capacity. 150-lbs. Load Rating. Shipping Weight: 22.00 lbs. | *$49.99 |
 | Troy DPH11 Professional Series 11-Foot Drywall  Panel Lift Hoist
Brand: Troy Model: DPH11 Part Number: DPH11
Our Troy drywall lift is made from an all welded steel construction, tool-free assembly and teardown, single stage winch with brake, and can be used by one person. It has a 11-foot maximum reach for horizontal ceilings and a 15-foot maximum reach for walls (determined by the 11-foot max lift and half the length of drywall). It can hold a 4-by-16-foot single sheet capacity, with a 150 lbs load rating, has 5-inch casters, and weighs 110lbs. MaxTool also backs up this lift with a Two Year Warranty for parts or factory defects. | *$179.99 |
 | Tru-line Lumber Crayon Holder
Brand: Johnson Model: 3500 Part Number: 3500 40-0659
PROTECTS CRAYON FROM BREAKING.
ALUMINUM HOLDER
LEATHER STRAP
FITS STANDARD HEX SHAPED CRAYONS | *$1.95 |
 | True 6x6 Round Cedar Post Cap [CAPITOL CITY LUMBER]
Brand: CAPITOL CITY LUMBER
This is a heavy duty rustic post cap made out of Western Red Cedar. Western Red Cedar is naturally resistant against rot and decay. There may be tight knots in the cap to give a true rustic look. It measures a full 1-1/2" tall for a sturdier look. This cap is designed to be used on a true 6x6 post that measures a full 6"x6". Please see our webstore to see the full line of post caps available. ***** Please contact us at 1-800-244-6492 with any questions on this product or other products on our website. ***RETURN POLICY***: If for any reason you are not completely satisfied, please return this product within 30 days of receiving and we will give you full credit of the product back. It is the customers responsibility to pay for the return postage of any products unless the product is damaged during original shipment. Please contact us at 1-800-244-6492 if you are making a return or have any questions regarding returns. Provide for us your name and order number to assist us with processing your request. ***ABOUT THE SELLER***: Capitol City Lumber Company is a unique lumber and hardware retail store. We cater to a wide array of customers from the do-it-yourselfers, homeowners, and remodelers to the small to large-size contractors. We specialize in having a vast array of lumber, building materials and hardware, often times the hard to find items. Our company was started in 1947 and we are still known as an ole timely lumber company by local customers. We believe in a policy of fair pricing, quality products and dependable service. Our store location is located at 4216 Beryl Road in Raleigh, North Carolina, near the NC State fairgrounds. | *$10.86 |
 | TUFF STUFF 4x4 TS-12500-B Winch
Brand: Tuff Stuff Model: TS-12500-B Part Number: TS-12500-B
- Single line rated pull 12,500 lbs (5682 kg)
br
- Motor: 6.65 hp / 5.0 kw, Series Wound
br
- Control: Remote switch,12 ft (3.7 m) lead
br
- Gear Train: 3 Stage Planetary
br
- Gear reduction ratio: 265.2:1
br
- Clutch: Sliding Ring Gear
br
- Braking Action: Automatic In-The-drum
br
- Drum Size: Diameter: 2.52" (64 mm)
br Length: 8.82" (224 mm)
- Cable: 88 ft. of 3/8 inch diameter (27 m of 9.5 mm diameter)
br
- Fairlead: 4-Way Roller Fairlead
br
- Recommended Battery: 650CCA,130 Minutes Reserve Capacity minimum
br
- Battery Leads: 2 Gauge, 72" (1.83 m) each
br
- Finish: Powder Coated Black
br
- Net Weight: 93.5 lbs (42.5 kg)
br
- Gross Weight: 102.3 lbs (46.5 kg)
br
- Overall Dimensions: 21.3" L x 6.3" W x 8.6" H (552 x 160 x 218 mm)
br
- Mounting Bolt Pattern: 10.00" +/- 0.015" x 4.50" +/- 0.010" (254mm x 114.3mm) | *$299.00 |
 | TUFF STUFF UNIVERSAL WINCH MOUNT
Brand: Tuff Stuff Part Number: TSUWM 1000
Winch Universal Mount is great for any vehicle and may require some modification. Cheap - Easy and no hassle mounting plate makes lining up the bolts and Fairlead a snap. Why try and make one yourself when you can purchase this Winch Universal mounting plate for just $55. Made of the highest quality steel and professionally powder coated to meet all of the standards. | *$55.00 |
 | TUFF STUFF WINCH JEEP MOUNT
Brand: Tuff Stuff Model: TSJWM Part Number: TSJWM
WINCH JEEP WRANGLER Mounting Plate is great when you are looking for a quality yet cheap alternative to making your own plate. This plate is made of the highest quality steel with a high gloss powder coating of Black paint. | *$75.00 |
 | TUFF STUFF WINCH MOBILE MOUNT
Brand: Tuff Stuff Part Number: TSMMS
What a deal - Great Quality low cost mobile mount with FREE quick connector. Made to last with heavy duty metal and powder coated to last. Purchase Manufacturer direct - why pay retail? | *$85.00 |
 | Tuggy T Post Puller
Brand: Northern Tool Equipment
Three easy strokes of the 30in. handle pull medium or heavy duty metal fence posts! Won't bend them. Steel puller is 36in. high. Works from either side of post. Tough gray finish. U.S.A. | *$62.99 |
 | TURMOflex Winter Work Gloves - Large
Brand: Weldas Part Number: 10-2266
These "Most Perfect" winter work gloves are scientifically designed for the highest insulation rating. The multi-layering formation allows sweat vapor to escape while keeping cold air and moisture outside. A 100% fleece cotton layer has replaced the traditional brushed nylon layer for maximum comfort and sweat absorbency. | *$9.84 |
 | TURMOflex Winter Work Gloves - Large
Brand: Weldas Part Number: 10-2255L
These "Most Perfect" winter work gloves are scientifically designed for the highest insulation rating. The multi-layering formation allows sweat vapor to escape while keeping cold air and moisture outside. A 100% fleece cotton layer has replaced the traditional brushed nylon layer for maximum comfort and sweat absorbency. | *$5.77 |
 | Turquoise Blue Bubble Blend
Brand: GLASS TILE WAREHOUSE
A mixture of light and medium blue bubble blends. 4mm Venetian glass adds style and beauty to any installation. The color on all crystal glass at Glass Tile Warehouse is kiln fired, which means it will never scratch, chip, fade or peel. Instanty and economically transform any space with the use of glass tile from Glass Tile Warehouse. | *$4.19 |
 | Tuscany Classic Travertine Versailles / Ashlar Pattern Tiles (UF/B/CE)
Brand: Oracle
Create a warm and inviting living space with our Versailles pattern tiles made from the highest quality, premium Turkish Tuscany Classic Travertine, which consists of different shades of ivory naturally blended together. Strictly selected; consistent in color, sizing and finish. Suitable for commercial and residential projects. Interior as well as exterior surface covering applications. Meets your needs at a very low cost. Item originally retails for $10.50/sq. ft. **********Yours is only $5.25/sq. ft. including shipping with a MINIMUM PURCHASE of 416 sq. ft.********** Please contact us for samples or smaller quantities. | *$5.25 |
 | Two (2) Step Ladder
Brand: LiCota
Two (2) Step Ladder | *$19.95 |
 | Two Step Grout Repair Kit
Brand: Homax Model: 9350 Part Number: 9350
Includes white, latex fortified, premixed grout/adhesive and carbide tipped grout saw. Remove old grout and damaged tiles with grout saw. Replace broken tiles and re-grout with grout/adhesive. | *$6.99 |
